CE ISO Certified Good Quality 10,000 t/a Biomass Pellet Mill Production Line Project

Date: 03/05/2021 08:42:28 From: wood-pellet-plant.com Clicks:

The raw materials are wood chips, bamboo chips, tobacco rods, waste wood and other biomass pellet production line projects. Biomass pellet fuel is a pellet fuel made of wood chips, bamboo chips, branches, etc. as raw materials, through professional machinery, special processes, without any chemical additives, high pressure and low temperature compression molding. Biomass pellet fuel has high calorific value, is clean and pollution-free, and is a high-tech environmentally friendly product that replaces fossil energy. Biomass fuel is a renewable energy source. As long as there is sunlight, the photosynthesis of green plants will not stop, biomass energy will not be exhausted, and greenhouse gases will maintain a dynamic balance.

CE ISO Certified Good Quality 10,000 t/a Biomass Pellet Mill Production Line Project

Ce iso certified good quality 10,000 t/a biomass pellet fuel production line project, the project covers an area of ​​6,000 square meters, with a total construction area of ​​about 5,300 square meters. The project mainly constructs crushing and crushing workshops, drying workshops, pellet molding and warehouses, staff dormitories and canteens, offices, and raw materials storage areas Wait. After the project is completed, the raw materials used are wood scraps, sawn wood shavings, crop roots, stems, leaves, shells, discarded wood, etc. The designed annual production of 10,000 tons of biomass pellet fuel.

1. Project Overview

Table 1 List of project area

2. Production equipment

The main equipment of the project is detailed in the table below

Table 2 List of main equipment of the project

3. Raw materials

Table 3 List of raw material consumption

4. Labor quota and work system

The project has a labor quota of 10 people, and the work system is 300 days a year.

5. Production process

(1) The project purchases furniture factory scraps, wood chips, bamboo chips, branches, tobacco rods, roots, stems, leaves, shells, and waste wood of agricultural crops as raw materials.

(2) The raw materials are sieved after being crushed by coarse and fine crushers.

(3) Due to the high moisture content in the raw materials, the moisture content of the raw materials is 35%, which cannot meet the feeding conditions of the biomass pellet machine. The materials need to be dried, and the moisture content after drying is required to be 15%. The pulverized raw materials are then burned with biomass fuel through a dryer, and the biomass pellet fuel enters the high-temperature combustion chamber through the automatic feeding system, where high-temperature combustion occurs rapidly in the high-temperature combustion chamber to generate high temperatures.

biomass pellet machine

(4) After drying, the material is conveyed to the biomass pellet machine by a conveyor belt, and the pellet machine is fed by its own feeding equipment. The biomass raw material is sent to the feeding chamber of the pellet machine, which acts together with the distributor and the scraper. Spread the material evenly on the flat mold, and then squeeze the material into the die hole. The material undergoes forming and shape retention processes in the die hole. Due to the increase in pressure in the molding machine, the particles themselves deform and plastically flow, and generate a lot of heat under the action of friction, which causes the lignin contained in the raw materials to soften, increase the adhesion, and the softened lignin and the inherent in biomass The combined action of cellulose makes the biomass gradually shape, and after a certain period of time, it is extruded in a cylindrical shape. The rotating cutter cuts the material to form a cylindrical shape and sends it out through the discharge port. In this project, no binder is added during the compression molding process.

(5) After molding, the pellets are cooled in the cooling chamber and then packaged. The packaging stage mainly produces packaging waste and unqualified products.

(6) The finished product is shipped out after packaging.

6. United States High Capacity Fully Automatic 10 Tons/Hour Biomass Wood Pellet Making Line Project

• Name: 10 Tons/Hour Biomass Wood Pellet Making Line
• Country: United States
• Capacity: 10 T/H
• Date: November 2020
• Installation cycle: 60 Days
• Pellet Size: 6-8mm

This project is a high capacity fully automatic 10 tons/hour biomass wood pellet production making line. The customer’s main production raw material is some waste wood, and contains iron nails and other impurities. Therefore, if wood pellets are to be manufactured, they must be sliced ​​and crushed first, and then crushed again with a wood pellet mill to meet the granulation requirements. The core equipment of this set of equipment is 3 sets of MZLH768 circular wood pelletizer pelletizers, each with an hourly output of about 2.5-4 tons and a power of 250kw.

United States10 Tons/Hour Biomass Wood Pellet Making Line equipment shipped

The above is the article for you: CE ISO Certified Good Quality 10,000 t/a Biomass Pellet Mill Production Line Project. If you are interested in our products or project solutions, please contact us. We will give you the best product quality and the best price. Email: enquiry@pellet-richi.com