Biomass Pellet Production Line Manufactures Straw Pellets, Wood Pellets, Bamboo Pellets and Branch Pellets
Date: 03/16/2021 08:43:45 From: wood-pellet-plant.com Clicks:
The project is a biomass pellet production line with an annual output of 20,000 tons. The production line is divided into straw pellet production line, wood pellet production line, bamboo pellet production line and branch pellet production line according to different raw materials. The total investment of the project is 4 million US dollars, of which environmental protection investment is 100,000 US dollars. The total area of the project is 9,188 square meters, and the total construction area is about 4,511.59 square meters. In the biomass pellet production line project, the production workshop is divided into slicing and crushing area, drying area, granulating area, packaging area, finished product area, etc. according to process requirements.
Biomass Pellet Production Line Manufactures Straw Pellets, Wood Pellets, Bamboo Pellets and Branch Pellets
1. Biomass Pellet Production Line Project content
The total area of the project is 9,188 square meters, and the total construction area is about 4,511.59 square meters. The project utilizes two existing buildings on the site, with an area of about 668 square meters, and a new factory building with a construction area of about 3,743.59 square meters, guards and other 100 square meters.
Table 1 List of main economic and technical indicators
project | unit | Quantity | Remarks | |
Land area | Square meter | 9188 | ||
Total surface area | Square meter | 4512 |
Table 2 List of project area
project name | content | Main pollution during operation period | Remarks | |||
structural work |
Production area |
New plant 3 #: 1F, the building area 3743.59m 2 , steel, including crushing plant region, drying region, forming regions to granulation and finished temporary storage area; |
Exhaust gas, noise, solid waste | New |
||
Raw material warehouse | Existing workshop (built building 1#): 1F, concrete brick structure, construction area of about 294.32m 2 ; raw material warehouse for wood chips and bamboo chips | dust | Existing building | |||
Office Student Building |
Built building 2#: building area of 373.68m 2 , 2-story, concrete brick structure; office building, canteen | Domestic sewage, domestic garbage, oil fume | Existing building |
Table 3 List of product solutions
name | Production (tons/year) |
Straw pellets | 2000 |
Wood pellets | 6000 |
Bamboo shavings particles | 6000 |
Branch granules | 6000 |
total | 20000 |
2. Main equipment of Biomass Pellet Production Line Project
Table 4 List of main equipment of the project
Serial number | name | Quantity (sets / set) | Remarks (model) | ||
1 | Crushing section | 1 | |||
1.1 | Vibrating conveyor | 1 | ZSJ70*40 | ||
1.2 | Tyrannosaurus Crusher | 1 | T-REX5050A | ||
1.3 | Conveyor | 1 | PSJ65*8 | ||
1.4 | Conveyor | 5 | PSJ80*10 | ||
1.5 | Frequency converter | 1 | |||
1.6 | grinder | 1 | GXP75*100 | ||
1.7 | Fan | 1 | CM-BC | ||
1.8 | Shakron | 1 | Q2000 | ||
1.9 | Turn off the fan | 1 | 400 | ||
1.10 | Bag filter | 1 | 210 holes | ||
1.11 | Pipeline | 1 | |||
2 | Drying section | ||||
2.1 | Conveyor | 2 | PSJ80*15 | ||
2.2 | Feeding frequency converter | 1 | |||
2.3 | Feed off fan | 1 | 400 | ||
2.4 | Three-layer tumble dryer | 1 | |||
2.5 | Fan | 1 | |||
2.6 | Shakron | 1 | |||
2.7 | Unloader | 1 | |||
2.8 | Turn off the fan | 1 | |||
2.9 | Flame retardant | 1 | |||
2.10 | High temperature air duct and hot blast stove | 1 | |||
3 | Granulation section | ||||
3.1 | Conveyor | 1 | PSJ80*14 | ||
3.2 | Leveler | 2 | |||
3.3 | Long Fangcang | 1 | |||
3.4 | Feeder | 3 | LWJ-560 | ||
3.5 | Rotating steel frame | 3 | |||
3.6 |
New granulator | 3 | |||
Automatic lubrication | 3 | ||||
Air-cooled dust removal | 3 | ||||
3.7 | Flat conveyor | 1 | |||
4 | Cooling section | ||||
4.1 | Large angle conveyor | 1 | DPJ65 | ||
4.2 | Cooler | 1 | |||
4.3 | Fan | 1 | |||
4.4 | Shakron | 1 | 1600 | ||
4.5 | Leveler | 2 | |||
4.6 | Simple sieve | 1 | |||
5 | Packing section | ||||
5.1 | Large angle conveyor | 1 | |||
5.2 | Silo | 1 | |||
5.3 | Leveler | 2 | |||
5.4 | Packaging | 1 |
3. Raw Materials of Biomass Pellet Production Line Project
This project uses professional equipment to compress agricultural and forestry waste into biomass pellet fuel, and no adhesives are used in the production process.
Table 5 List of project raw and auxiliary materials and energy consumption
sequence | name | unit | Annual consumption | Remarks |
1 | Straw | t | 2476 | 30% moisture content |
2 | Sawdust | t | 6316 | The moisture content is about 15%, without drying |
3 | Bamboo shavings | t | 6316 | The moisture content is about 15%, without drying |
4 | Branch wood | t | 9000 | Water content 45% |
5 | Biomass pellets | t | 600 | Stove fuel: the project failed mainly from the production of goods |
6 | water | t | 672 | Wherein the domestic water 252t / a, stove dust with added amount of water 420t / a |
7 | Electricity | KW·h | 1.6 million |
4. Labor quota and work system
The project has a labor quota of 18 people, with an annual working day of about 280 days, two shifts per day, each with an 8-hour work system, and the working hours are 8:00-18:00; 18:00-24:00. The plant staff intend to hire people around the project construction site to provide Chinese meals without setting up dormitories.
5. Process flow of Biomass Pellet Production Line Project
(1) Raw materials: The raw materials are mainly crop stalks, wood chips, bamboo chips, and construction waste. Generally, wood chips and bamboo chips can be directly pelletized to produce biomass molding particles without drying. Waste construction materials (wood), branch materials, etc. According to the situation of the incoming material, it will be crushed and dried before the granulation production.
(2) Chipping and crushing: Chipping raw materials with larger diameters such as straw, branch wood, construction waste (wood), etc., and then proceed to the next process by refining 3-8mm powder. The discharge port of the crusher is connected to the Shakelong dust collector, which mainly uses centrifugal force to separate the scraps and deposits them in the dust collector, and then discharges them through the material port. After the gas is discharged from the Shakelong dust collector, it is processed by the bag filter and then discharged by 15m. The gas cylinder is discharged, and the collected dust is reused for production.
SFSP Wood Hammer Mill
(3) Drying: Biomass molded fuel has strict requirements on the water content of the raw materials. After the raw materials are crushed, they are dried by a rolling dryer. The rolling dryer uses the heat and hot air of the biomass waste hot air stove to affect the raw materials. For drying, the moisture content of general raw materials is about 15-45% (the moisture content of straw, branch wood, construction waste (wood) and other raw materials is about 30-45%, which needs to be dried; the moisture content of raw materials such as wood chips and bamboo chips is about 15%, without drying). The project drying procedure is mainly for branches and waste wood with high moisture content. After drying the raw materials, the moisture content of the raw materials is generally about 15%. The dust generated in the drying process is collected and processed by the Shakelong dust collector, and the drying waste gas is discharged through a 15m exhaust cylinder after wet dust removal.
Roller Dryer Machine
(4) Granulation and molding: The dried biomass dust passes through a ring die pellet machine to compress the raw materials into cylindrical pellets with a diameter of 8cm~9cm and a diameter of 8mm~10mm. The dust generated in the granulation process is processed by the Shakron dust collector and the bag filter, and then discharged through a 15m exhaust tube, and the collected dust is reused for production.
Biomass Pellet Mill
(5) Cooling: When the raw material is processed into pellets, the temperature of biomass fuel pellets can reach 50℃~60℃, and it will be cooled to normal temperature by a cooler.
(6) Packaging: The cooled biomass particles are bagged and packaged into the warehouse by the packaging machine, which is the product.
6. Austria 5Ton/Hour Wood pellet Production Line
- Name: Wood pellet Production Line
- Country: Austria
- Capacity: 5Ton/Hour
- Date: January 2020
- Installation cycle: 50 Days
- Pellet Size: 6-12mm wood pellet
The main equipment of Austria's 5t/h wood pellet production line: drum wood chipper machine(30kw), wood hammer mill crusher(75kw), box cylinder pulse dust remover(11kw), electric control cabinet, vibrating screen classifier(1.5kw), Europe use wood pellet machinery(37kw),counter-flow pellet cooler(0.75kw),rotary dryer,automatic bagging system(3kw). Mainly produce and process 6mm wood pellets for heating small private houses and medium-sized industrial boilers in Austria .
The above is the article for you: Biomass Pellet Production Line Manufactures Straw Pellets, Wood Pellets, Bamboo Pellets and Branch Pellets. If you are interested in our products or project solutions, please contact us. We will give you the best product quality and the best price. Email: enquiry@pellet-richi.com
Production Line Equipment
Related News
- >Quote for a Line Canable to Produce 1t/h Wood Pellets
- >Delivery 500-700 Kg/h High Performance Wood Pellets Making Machine
- >1.5 Ton per Hour Whole Production Line of Biomass Wood Pellet Mach
- >How the Nepal Energy Company Converts Biomass Into Fuel Pellets?
- >CE ISO Certified Good Quality 10,000 t/a Biomass Pellet Mill Produ
- >150,000 t/a Biomass Pellet Machine Production Line Project for Woo
- >Dubai Converts Palm Waste Into Biomass Pellet Fuel
- >Biomass Pellet Fuel VS Biomass Raw Materials
- >Canada Converts Cardboard Waste Into Biomass Fuel Pellets
- >U.S. Arkansas Plans to Build a Large Biomass Wood Pellet Mill Pla
Here you can submit any questions and we will get back to you as soon as possible. We will not disclose the information you submit to anyone, please rest assured.
Copyright© 2020 Richi Machinery. All rights reserved. Site Map