Work together.Success together.
Media Center

Responsible for every customer, every product and every solution

Home > Media Center > Industry Trends

150,000 t/a Biomass Pellet Machine Production Line Project for Wood, Straw, Branches, Etc

Date: 03/05/2021 08:42:09 From: wood-pellet-plant.com Clicks:

Kindly Reminder: If you are interested in our products, Please get in contact with us

As the government phases out coal to replace more sustainable alternatives, the rise of biomass energy fills the void left by it. Biomass is made up of things that keep growing. Generally, this includes agricultural and forestry wastes such as straw, wood, branches, bark, and sawdust, which are all high-quality raw materials for biomass pelleting. Compared with other biomass energy technologies, biomass pellet technology is easier to achieve large-scale production and use, and its use convenience is the same as that of gas, fuel and other energy sources. The project has an annual output of 150,000 tons of straw, wood and biomass pellets, with a total investment of more than 2 million USD. The biomass straw pellet production line project has a total of about 17 employees. The production adopts a shift system. The annual working day is 300 days and the annual working time is 7,200 hours. The following is a detailed introduction to the raw materials, main equipment and floor space of the biomass pellet production line.

Biomass Pellet Machine Production Line Project for Wood, Straw, Branches
Biomass Pellet Machine Production Line Project for Wood, Straw, Branches

1. Raw and auxiliary materials

Operating period: see Table 1-1 for the consumption of raw and auxiliary materials.

Table 1-1 Annual consumption of main raw and auxiliary materials of the project

Serial number name Consumption (t/a) Remarks
1 Biomass such as straw and branches 150000 Moisture≤20%
2 Binder 2700 Mainly starch, moisture content ≤40%
3 timber 11520m 3 /a Moisture 30% ~40%

2. Main equipment

The equipment settings of this project are shown in Table 1-2.

Table 1-2 List of project production equipment

Serial number Equipment name model amount)
1 Infeed conveyor L=5m 2
2 Chipper BX-218D 1
3 Buffer bucket vibration motor GFZ-J-30 4
4 SFSP Wood Hammer Mill SFSP66x100 3
5 Bottom air duct and wind path - 2
6 Fan 6-30NO5.5A 2
7 Unloader Φ1200 2
8 Wind shut TGF9 4
9 Enclosed belt conveyor W800x12m 2
10 Buffer bucket vibration motor - 2
11 Feeding auger TLSS32 508 1
12 Three return roller SG-30 150ML 3 (one of which is a single tube)
13 Discharge auger TLSS32 1
14 Unloading system Improved 9.6m flatbed truck 1
15 Wind shut TGF25 1
16 Hand burner - 1
17 Buffer bucket vibration motor - 4
18 To be granulated bin - 7
19 Wood pellet machine MZLH520 7 (including 1 briquetting machine)
20 Unloader Φ800 2
twenty one Particle sieve SCY80 1
twenty two Finished product warehouse   1
twenty three Pneumatic system   1
twenty four Gasifier   1
25 Hot blast stove   2

3. Product plan

After the completion of the project, it can achieve an annual output of 60,000 tons of biomass pellets and an annual output of 90,000 tons of biomass briquettes. The main project and product plan of this project are shown in Table 1-3.

Table 1-3 List of project product plans

Serial number name unit Quantity (10,000 tons/a) Annual operating hours Remarks
1 Biomass pellets Ten thousand tons 9 7200h Biomass briquettes form an annual output of 60,000 tons, of which about 20,000 tons are used as raw materials to make machine-made charcoal.
2 Biomass briquette Ten thousand tons 5.57
3 Machine-made charcoal Ten thousand tons 0.6

4. Floor area

Table 1-4 Floor area of ​​workshops, raw materials and auxiliary projects

category Single project name Engineering Content
 
structural work
Straw pellet production workshop Single-layer brick and steel-concrete structure, covering an area of ​​1000m 2
Straw briquetting workshop Single-layer brick and steel-concrete structure, covering an area of ​​1000m 2
Production workshop Single-layer brick and steel-concrete structure, covering an area of ​​2000m 2
Raw material greenhouse Single-layer brick and steel-concrete structure, covering an area of ​​2000m 2
Auxiliary engineering Single-layer brick-concrete structure, covering an area of ​​50 m 2

5. Biomass pellet production process:

(1) Crushed raw materials

Put the straw (including wood processing residues such as branches) into the crusher for crushing treatment.

(2) Screening

According to requirements, the crushed biomass is sieved according to size.

(3) Drying

The drying process is mainly to remove excess moisture in the biomass. The heat source of the drying section is mainly biomass gas produced by the small biomass gasifier in the biomass gas stove system. The biomass gas combustion hot air directly contacts the material. Heating and drying. When the drying yard of biomass raw materials (agricultural and forestry wastes such as straws or branches) is large enough, the drying method should be adopted to remove the biomass moisture as much as possible; when the moisture content of the biomass raw materials is less than 20%, the drying is based on the principle of energy saving and environmental protection. The dry process does not start.

Rotary Drum Drying machine
Rotary Drum Drying machine

Purchase wood with a moisture content of 30%-40%, and directly dry it to reduce the moisture to below 20%. The heat source of the drying section is mainly biomass produced by a small biomass gasifier in the biomass gas furnace system. Combustion of gas, biomass gas and hot air directly contact the material for heating and drying. When the drying yard of biomass raw materials (agricultural and forestry wastes such as straws or branches) is large enough, the drying method should be adopted to remove the biomass moisture as much as possible; when the moisture content of the biomass raw materials is less than 20%, the drying is based on the principle of energy saving and environmental protection. The dry process does not start.

(4) Cooling

Pass the dried straw through a cooler to cool to room temperature.

(5) Mixed granulation

According to requirements, mix straws and other raw materials with binders. The raw materials are made into pellets through a biomass pellet machine.

biomass pellet machine
biomass pellet machine

(6) Drying and cooling

The moisture in the biomass particles is removed, and the room temperature cooling treatment is performed.

(7) Screening

The finished biomass pellets of different sizes are screened and packaged and sold separately.

6. Advantages of biomass pellets

biomass pellets
biomass pellets

Richi Machinery provides various biomass pellet granulating equipment, including biomass pellet machine, wood pellet machine, wood pellet machine, organic fertilizer pellet machine and so on. We also focus on biomass pellet production line equipment, such as straw pellet production line, wood pellet production line, peanut shell pellet production line and so on. The company has focused on equipment for the pellet machine industry for 28 years. We are currently exported to 113 countries, with reliable quality and trustworthy!

The above is the article for you: 150,000 t/a Biomass Pellet Machine Production Line Project for Wood, Straw, Branches, Etc. If you are interested in our products or project solutions, please contact us. We will give you the best product quality and the best price. Email: enquiry@pellet-richi.com

SEND INQUIRY

Here you can submit any questions and we will get back to you as soon as possible. We will not disclose the information you submit to anyone, please rest assured.

Your Name
Your E-mail*
Your Telephone
Product Name
If you need specific information about anything about our product, please write here!

Copyright© 2020 Richi Machinery. All rights reserved.     Site Map

0086-13838389622