Electric Flat Die Pellet Mill

Product Description

---

With people’s increasing attention to environmental protection, many countries have made policy to advocate renewable energy and punish fuel pollution. Wood pellet machine emerges as the time requires. It forms high pressure between roller and flat die and transform loose materials into hard pellets, with higher combustion efficiency. Flat die pellet mill can not only supply bio-fuel at low cost, but exempt your trouble with agriculture waste.

Usable raw materials

Electric motor pellet machine is able to process various crude-fiber materials into pellets, such as sawdust, rice husk, cotton stalk, cotton seed hull, weed, crop straws, peanut shell, corncob, household garbage, factory waste, etc.

Some of them are hard to get formed because of low adhesive rate. But a pellet machine can realize this even without any binders. It a useful equipment for timer mill, saw mill, tree farm, fuel plant, furniture manufacturer and people who need wood pellets.

Application area

Home heating and hot water supply. Wood pellets have higher combustion ratio than firewood, and they are easy to store and transport.

Industrial biomass boiler. Wood pellets can take the place of coal and used as the main fuel in industrial boiler. The adoption of biofuel can relieve the air pollution.

Power generation. wood pellets can be used in thermal power station.

Electric Flat Die Pellet Mill drawing

This small-scale wood pellet mill adopts flat die structure. The main components are electric motor, gearbox, drive shaft, flat die, roller, feed hopper, slicer and outlet.

The electric motor drive the main shaft through gearbox. The main shaft drive the flat die. The roller rotate on the flat die as well as on its own axis. When you feed raw materials into the feed hopper, they fall on the flat die and get evenly distributed. When the flat die rotates, the roller continuously rotates over the raw materials, and press them into the holes on flat die. They get formed in these holes and get squeezed out. When they come out, they become solid cylinders. There is a slicer cutting them into short pellets. The pellets are sent to the outlet through the dump tray.

The density of these pellets are 1.1*103 kg/m3. The diameter is 2.5-10mm according to the hole size of flat die. You can adjust the length by changing the height of the slicer. They meet the European standard, where the length should be 5 times that of the diameter.

Features

Parameter

---